TM 9-2350-261-20-3
REPLACE/REPAIR ANTENNA MAST BRACKET ASSEMBLY, TAILLIGHT WIRING
HARNESS, AND ANTENNA MAST BASE ASSEMBLY (M1068 ONLY) — Continued
0554 00
13. Replace two rubber pads (2) on antenna mast brackets (1) and (3).
a.
If damaged, remove rubber pads (2) from brackets (1) and (3). Clean off all excess adhesive. Use cleaning
compound and wiping rags.
DISASSEMBLY
1.
Remove four screws (1), lockwashers (2), washers (3), two brackets (4), and eight adjustment washers (11) from base
(5). Discard lockwashers.
2.
Remove two cotter pins (10), headed pins (7), four washers (8) and (9), and base (5) from mounting bracket (6). Discard
cotter pins.
0554 00-6