TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 500 of 932

TM 9-2350-261-20-3

REPLACE/REPAIR ANTENNA MAST BRACKET ASSEMBLY, TAILLIGHT WIRING

HARNESS, AND ANTENNA MAST BASE ASSEMBLY (M1068 ONLY) — Continued

0554 00

1.

Install new rubber pads (2) on antenna mast brackets (1) and (3).

a.

Apply a thin, even coat of adhesive to the rubber pad surfaces (2). Allow to dry 20 to 40 minutes. Apply a thin,

even coat of adhesive to the inside of the brackets (1) and (3). Allow to dry 30 to 120 seconds. Press the surfaces of

the rubber pads and brackets with the adhesive on them together firmly.

2.

Install stationary part of antenna mast (1) to right rear of hull.

a.

Install antenna mast (1), four washers (2), ground lead (8), and four screws (3) to right rear of hull.

3.

Install hinged portion of antenna mast (4).

a.

Install antenna mast (4), hinge pin (5), washer (6), and new cotter pin (7).

0554 00-8