TM 9-2350-261-20-3
REPLACE/REPAIR ANTENNA MAST BRACKET ASSEMBLY, TAILLIGHT WIRING
HARNESS, AND ANTENNA MAST BASE ASSEMBLY (M1068 ONLY) — Continued
0554 00
NOTE
If catches or strikes were removed in REMOVAL Step 10, first do Step 4a or Step 4b.
4.
Latch two catches (8) on antenna mast brackets (1) and (4).
a.
Install two catches (8) and four rivets (9) to antenna bracket (1).
b.
Install two strikes (10), four new lockwashers (11), and screws (12) on antenna mast (4). Tighten screws securely.
5.
Install taillight (1) to antenna mast bracket (2).
a.
Install taillight (1), two washers (3), ground lead (5), and two screws (4) on antenna mast bracket (2). Tighten
screws securely.
055400-9