TM 9-2350-261-20-3
REPLACE/REPAIR ANTENNA MAST BRACKET ASSEMBLY, TAILLIGHT WIRING
HARNESS, AND ANTENNA MAST BASE ASSEMBLY (M1068 ONLY) — Continued
0554 00
6.
Install two new grommets (5) and (6) in antenna mast (2).
7.
Install taillight wiring harness (7) with shield through mounting hole (8) in hull.
a.
Install lockwasher (9) and nut (10) over circuit leads and onto shield (11). Tighten nut securely on shield.
b.
Install the other end of wiring harness (7) through grommet (5) on antenna mast bracket (2). Route wires and
connectors for taillight through grommet (6).
0554 00-10