TM 9-2350-261-20-3
REPLACE 5.0 KW AUXILIARY POWER UNIT BULKHEAD-TO-HULL FUEL SUPPLY
HOSES (M577A2 AND M1068 ONLY) — Continued
0596 00
INSTALLATION
NOTE
Replacing a flareless fuel hose may also require new mating fittings such as a nipple or elbow.
1.
Install nipple (9) in flange (13) and secure with jamnut (15).
2.
Install new gasket (14) and flange (13) on hull roof and secure with three screws (11) and washers (12).
3.
Install elbow (10) on nipple (9).
4.
Connect fuel hose (2) to nipple (9) in hull ceiling. Route hose over to personnel heater.
5.
Install new tie strap (7) securing fuel hose (2) to remote control harness (8).
6.
Install clamp (6) on fuel hose (2). Secure clamp to bulkhead crossbeam with screw (4) and new lockwasher (5).
7.
Secure fuel hose (2) to personnel heater shield (3) with new tie strap (1).
0596 00-4