TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 717 of 932

TM 9-2350-261-20-3

SERVICE HEATER FUEL PUMP

0597 00

THIS WORK PACKAGE COVERS:

Service Bendix/Facet (page 0597 00-1).

Service Walbro (page 0597 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Cleaning compound solvent (WP 0782 00, Item 16)

Wiping rag (WP 0782 00, Item 76)

Gasket

Gasket

Personnel Required

Unit Mechanic

References

See your -10

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Ramp lowered (see your -10)

Battery ground lead disconnected (WP 0294 00)

Floor plate removed (WP 0436 00, WP 0438 00, or

WP 0441 00)

1.

Close heater fuel shutoff valve (see your -10).

2.

Remove cap (1), gasket (2), and strainer (3) from fuel pump (4). Discard gasket.

3.

Clean cap (1) and strainer (3) with cleaning compound.

4.

Check strainer (3). Replace strainer if screen is torn.

5.

Install strainer (3), new gasket (2), and cap (1) on fuel pump (4).

6.

Open heater fuel shutoff valve (see your -10).

059700-1

SERVICE BENDIX/FACET