TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 733 of 932

TM 9-2350-261-20-3

REPLACE PERSONNEL HEATER FUEL PUMP (M1064 ONLY) — Continued

0601 00

INSTALLATION

1.

Alignclamp(1)onfuelpumplead(2)withhullbracket

.Secure with two new lockwashers (3), screw (4), and nut (5).

2.

Place fuel pump (6) on hull bracket. Secure with four new lockwashers (7) and two screws (8).

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

3.

Apply light coat of sealing compound to all external tapered threads. Do not apply sealant beyond small end of external

tapered threads.

4.

Install elbow (9) on fuel pump (6).

5.

Install hose (10) on elbow (9).

6.

Install tee (11) on fuel pump (6).

7.

Install cap (12) on tee (11).

8.

Install hose (13) on tee (11).

9.

Connect fuel pump lead (2) to circuit 402 lead (14).

060100-3