TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 729 of 932

TM 9-2350-261-20-3

REPLACE PERSONNEL HEATER FUEL PUMP (M113A2 AND M1059) — Continued

0600 00

INSTALLATION

1.

Place fuel pump (4) on bulkhead bracket. Secure with four new lockwashers (3), two washers (2), and screws (1).

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

2.

Apply light coat of sealing compound to all external tapered threads. Do not apply sealant beyond small end of tapered

threads.

3.

Install adapter (5) on fuel pump (1). Install hose (6) on adapter (5).

4.

Install elbow (7) on fuel pump (1).

NOTE

If new hose assembly is being installed, reuse spiral tubing.

5.

Install fuel supply hose (8) on elbow (7).

060000-3