TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 737 of 932

REPLACE PERSONNEL HEATER FUEL PUMP (M577A2 AND M1068 ONLY) — Continued

INSTALLATION

1.

Place fuel pump (1) on bulkhead bracket. Secure with two screws (2), four new lockwashers (3), and two new locknuts

(4).

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

2.

Apply light coat of sealing compound to all external tapered threads. Do not apply sealant beyond small end of tapered

threads.

3.

Install elbow (5) on fuel pump (1). Install fuel hose (6) on elbow. Install hose (6) under hose (7).

4.

Install adapter (8) on fuel pump (1). Install fuel hose (7) on adapter.

5.

Align clamp (9) on fuel pump lead (10) with weldnut. Secure with two new lockwashers (11) and screw (12).

6.

Connect fuel pump lead (10) to circuit 402 lead (13).

060200-3

0602 00

TM 9-2350-261-20-3