TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 90 of 932
TM 9-2350-261-20-3
REPLACE FLOOR PLATES (M901A1 ONLY) — Continued
0441 00
NOTE
When installing floor plates in the M901A1, make sure electrical cables are not pinched
or damaged.
6.
Position floor plates (2) and (3) on vehicle structural supports. Have helper assist.
7.
Secure floor plates (2) and (3) to vehicle structural supports with seven lined washers (4), washers (5), and screws (6).
8.
Install floor plate (7) on vehicle structural supports. Secure with six lined washers (4), washers (5), and screws (6).
9.
Install two platform protectors (8) on floor plates (2) and (3). Secure with four flat washers (9) and screws (10).
10. Install access cover (11) on platform assembly (12). Secure with two washers (13) and screws (14).
FOLLOW-THROUGH STEPS
1.
Install personnel heater duct and hose (WP 0617 00).
2.
Raise and lock ramp (see your -10).
END OF TASK
0441 00-6
Back to Top
