TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 98 of 932
TM 9-2350-261-20-3
REPLACE DRIVER’S HATCH VISION BLOCK LOCKS AND SEALS — Continued
0444 00
NOTE
Steps 5 - 8 apply to M1064 only.
5.
Remove thumbscrew (1) and spring (2) from arm (3).
6.
Remove screw (4), washer (5), and arm (3) from bolt (6).
7.
Remove bolt (6) and washer (7) from driver’s hatch.
8.
Scrape seal (8) from vision block opening.
CLEAN
1.
Clean seal mating surface on hull with cleaning compound.
0444 00-2
Back to Top
