TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 80 of 932
TM 9-2350-261-20-3
REPLACE DRIVER’S COMPARTMENT HULL ACCESS COVERS — Continued
0439 00
CLEAN, INSPECT, AND REPAIR
1.
Clean access covers and hull mating surface with cleaning compound.
INSTALLATION
WARNING
Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These
compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you
dizzy and irritate your eyes and throat.
Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.
Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.
1.
Apply sealing compound to hull mating surface of access covers.
2.
Install rear access cover (4). Secure with eight washers (2) and screws (1).
3.
Install forward access cover (3). Secure with nine washers (2) and screws (1).
END OF TASK
0439 00-2
Back to Top
