TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 72 of 932
TM 9-2350-261-20-3
REPLACE FLOOR PLATES (M1064 ONLY) — Continued
0437 00
REMOVAL
1.
Remove screw (1) and washer (2) from guard (3).
2.
Remove screw (4), washer (5), locknut (6), and guard (3) from hull. Discard locknut.
3.
Remove eight eyebolts (7), one screw (8), and nine lined washers (9) from right front floor plate (10) and left front
floor plate (11).
4.
Remove two screws (12), lined washers (13), and rear floor plate (14) from carrier.
5.
Remove two locknuts (15), washers (16), screws (17), and guard (18) from rear floor plate (14). Discard locknuts.
6.
If necessary, remove two pads (19), three pads (20), and pad (21) from front crossmembers by scraping.
7.
If necessary, remove two pads (22) and (23) and three seals (24) and (25) from crossmembers by scraping.
0437 00-2
Back to Top
