TM 9-2350-261-20-3
REPLACE REAR FLOOR PLATES (M113A2 AND M577A2 ONLY)
0436 00
THIS WORK PACKAGE COVERS:
Removal (page 0436 00-1).
Installation (page 0436 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Adhesive (WP 0782 00, Item 2)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
Personnel heater floor duct removed, if installed
(WP 0617 00)
REMOVAL
1.
Remove 16 screws (1) and lined washers (2) from carrier hull.
2.
Remove two front floor plates (3) and (4) and rear floor plate (5) from hull crossmembers.
3.
If needed, remove two pads (6) and (7), rubber strips (8), six seals (9), and seal (10) from crossmembers by scraping.
043600-1