TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 67 of 932
TM 9-2350-261-20-3
REPLACE FINAL DRIVE DRAIN PLUGS AND HULL POPPET VALVES
0435 00
THIS WORK PACKAGE COVERS:
Removal (page 0435 00-1).
Installation (page 0435 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Socket Wrench Adapter (WP 0780 00, Item 5)
Materials/Parts
Antiseize compound (WP 0782 00, Item 8)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Rear floor plates removed (WP 0436 00)
REMOVAL
CAUTION
Carrier should not be operated with hull drain plug or poppet valve removed. This reduces air
flow through radiator and draws dirt and debris into power plant compartment, and water
into carrier.
NOTE
Three poppet valves and two drain plugs are installed on bottom of hull.
1.
Loosen three screws (1) and remove poppet valves (2) from hull.
2.
Remove two drain plugs (3) from hull. Use socket wrench adapter.
043500-1
Back to Top
