TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 58 of 932
TM 9-2350-261-20-3
REPLACE POWER PLANT REAR ACCESS PANELS (M1059 ONLY) — Continued
0432 00
REMOVAL
1.
Unscrew seven T-bolts (1). Remove upper and lower panels (2) and (3).
NOTE
Remove seals only if damaged.
2.
Bend back seal supports on panel to remove seals (4) and (5).
3.
Remove seven cotter pins (6), T-bolts (1), washers (7), and clamps (8) from hull. Discard cotter pins.
4.
Remove seven screws (9) and spacers (10) from hull.
5.
Remove two locknuts (11), screws (12), and cover (13) from hull. Discard locknuts.
6.
Remove four locknuts (14), screws (15), and support (16) from hull. Discard locknuts.
7.
Remove two screws (17), nuts (18), and rifle bracket (19) from bracket (20).
8.
Remove screw (21), locknut (22), and rifle clip (23) from bracket (24).
9.
Remove four screws (25), nuts (26), two plates (27), and brackets (20) and (24) from upper panel (2).
0432 00-2
Back to Top
