TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 56 of 932
TM 9-2350-261-20-3
REPLACE POWER PLANT REAR ACCESS PANELS (M113A2 AND
M901A1 ONLY) — Continued
0431 00
INSTALLATION
1.
Install support (1) on hull. Secure with four screws (2) and new locknuts (3).
2.
Install cover (4) on hull. Secure with two screws (5) and new locknuts (6).
3.
Install seven spacers (7) on hull. Secure with seven screws (8).
4.
Install seven clamps (9), washers (10), T-bolts (11), and new cotter pins (12) in hull.
5.
If removed, install new seals (13) and (14) on panels (15) and (16). Bend seal supports to secure seals to panels.
6.
Install panels (15) and (16) on hull. Tighten seven clamps (9) and T-bolts (11).
7.
Use chalk test (WP 0120 00) to ensure panel seals hull opening to prevent carbon monoxide leaks.
FOLLOW-THROUGH STEPS
1.
Inst all personnel heater duct (WP 0617 00)
.
END OF TASK
0431 00-2
Back to Top
