TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 54 of 932
TM 9-2350-261-20-3
REPLACE DRIVER’S POWER PLANT ACCESS PANEL — Continued
0430 00
INSTALLATION
1.
Install four washers (1) on hull. Secure with four screws (2).
2.
Install four clamps (3), washers (4), T-bolts (5), and new cotter pins (6).
3.
If new seal (7) is needed, install on panel (8). Bend support to secure seal to panel.
4.
Install driver’s access panel (8) in hull. Secure by tightening four T-bolts (5) and clamps (3).
5.
Perform chalk test (WP 0120 00) to ensure that panel seals hull opening to prevent carbon monoxide leaks.
END OF TASK
0430 00-2
Back to Top
