TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 53 of 932
TM 9-2350-261-20-3
REPLACE DRIVER’S POWER PLANT ACCESS PANEL
0430 00
THIS WORK PACKAGE COVERS:
Removal (page 0430 00-1).
Installation (page 0430 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Cotter pin (4)
Personnel Required
Unit Mechanic
References
WP 0120 00
Equipment Condition
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
REMOVAL
NOTE
If decals and plates on panel need replacin
g, see W P 051
1
00.
1.
Unscrew four T-bolts (1). Remove driver’s access panel (2) from hull.
NOTE
Remove seal only if damaged.
2.
Bend back seal support to remove seal (3).
3.
Remove four cotter pins (4), T-bolts (1), washers (5), and clamps (6) from hull. Discard cotter pins.
4.
Remove four screws (7) and washers (8) from hull.
043000-1
Back to Top
