TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 61 of 932
TM 9-2350-261-20-3
REPLACE POWER PLANT REAR ACCESS PANEL (M577A2,
M1068, AND M1064 ONLY)
0433 00
THIS WORK PACKAGE COVERS:
Removal (page 0433 00-1).
Installation (page 0433 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Cotter pin (5)
Locknut (2)
Personnel Required
Unit Mechanic
References
WP 0120 00
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
REMOVAL
NOTE
If decals on panel need to be replaced, see WP 0511 00.
1.
Unscrew five T-bolts (8). Remove panel (11) from hull.
NOTE
Remove seal only if damaged
2.
Bend back seal supports on panel to remove seals (10).
3.
Remove five cotter pins (9), T-bolts (8), washers (7), and clamps (6) from hull. Discard cotter pins.
4.
Remove five screws (5) and washers (4) from hull.
5.
Remove two locknuts (3), screws (2), and cover (1) from hull. Discard locknuts.
043300-1
Back to Top
