TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4

  TM-9-2350-261-20-4 - Page 33 of 767

TM 9-2350-261-20-4
REPLACE ELECTRONIC EQUIPMENT HEATER CONTROL BOX (M577A2
ONLY) — Continued
0630 00
INSTALLATION
1.
Place four new lockwashers (8) and control box case (6) on support bracket (10). Secure with two screws (7) and two
new locknuts (9).
2.
Install control box (4) in control box case (6). Secure with two screws (5).
3.
Connect heater wiring harness (3) to control box (4).
4.
Connect control box lead (2) to circuit 400A lead (1).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0294 00).
2.
Start heater (see your -10). Check that heater control box works properly. Turn heater off.
END OF TASK
0630 00-2


Back to Top