TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4

  TM-9-2350-261-20-4 - Page 39 of 767

TM 9-2350-261-20-4
REPLACE ELECTRONIC EQUIPMENT HEATER ASSEMBLY AND MOUNTING
BRACKETS (M577A2 ONLY) — Continued
0633 00
REMOVAL
1.
Disconnect wiring harness (1) from heater (2).
2.
Remove screw (3), two lockwashers (4), and ground lead (5) from heater elbow (6). Discard lockwashers.
3.
Remove intake and exhaust pipes from heater (WP 0634 00).
4.
Open two clamps (7) and lower heater (2).
5.
Remove fuel hose and fittings from heater (WP 0626 00). Remove heater (2) from carrier.
6.
Remove two screws (8), three lockwashers (9), ground lead (5), two locknuts (10), and saddle (11) from bracket (12).
Discard lockwashers and locknuts.
7.
Remove two screws (13), locknuts (14), and rear support bracket (15) from radio mount platform. Discard locknuts.
8.
Remove screw (16), locknut (17), screw (18), locknut (19), lockwasher (20), and bracket (12) from radio mount
platform. Discard locknuts and lockwasher.
9.
Remove three screws (21), lockwashers (22), and elbow (6) from heater (2). Discard lockwashers.
0633 00-2


Back to Top