TM 9-2350-261-34
REMOVE/INSTALL TRANSMISSION — Continued
0016 00
30. Install power plant wiring harness (4) in clamps (3) on cross-shaft bracket (5). Secure with two screws (1) and new
locknuts (2).
31. Fill transmission (see your -10).
32. Check engine oil level (see your -10).
FOLLOW-THROUGH STEPS
1.
Install power plant in carrier (see your -20).
2.
Adjust engine power disconnect (see your -20).
END OF TASK
0016 00-17/18 blank