TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 155 of 785

TM 9-2350-261-34

REPLACE TRANSMISSION — Continued

0017 00

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

6.

Apply a thin, even coat of primer and then sealing compound to cleaned external threads of elbows (1). Do not apply

primer or sealing compound beyond small end of threads.

7.

Install two new packings (2) and elbows (1) in transmission.

8.

Position range selector arm (14) on transmission shaft (11) with offset side of arm toward transmission and clamping

screw hole aligned with flat on shaft. Secure with screw (13) and nut (12).

9.

Position throttle valve arm (10) on transmission shaft (11) with offset side of arm away from transmission and clamping

screw hole aligned with flat on shaft. Secure with screw (9) and new locknut (8).

FOLLOW-THROUGH STEPS

1.

Install transmission on transfer gearcase (WP 0016 00).

2.

Install power plant in carrier (see your -20).

3.

Fill transmission (see your -10).

END OF TASK

0017 00-4