TM 9-2350-261-34
REMOVE/INSTALL TRANSFER GEARCASE — Continued
0019 00
WARNING
Hanging loads could kill or injure you. Keep away from hanging loads and overhead equipment.
Keep hands out of engine compartment while power unit is being removed or installed.
NOTE
One screw and washer is trapped in engine bell housing.
20. Attach a lifting device of at least 200 lb (91 kg) capacity to the transfer gearcase. Have helper assist.
21. Remove two screws (5) and washers (6). Detach transfer gearcase from engine. Have helper assist.
001900-5