TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 171 of 785

TM 9-2350-261-34

REPLACE TRANSFER GEARCASE — Continued

0020 00

ASSEMBLY

1.

Place new gasket (26) on differential oil pump (22).

2.

Install differential pump (22) with key (28) and retaining ring (27) in secondary pump drive gear (23).

3.

Apply a thin coat of antiseize compound to cleaned threads of two screws (24).

4.

Install differential oil pump (22) on transfer gearcase. Secure with two screws (24) and new key washers (25).

TIGH TEN S CREW S TO 42 0-4 80

LB

-

IN

(47-54 N·M) TO RQU E. Use torque wrench .

5.

Install differential pump (22) on drive gear (23). Secure with washer (21), nut (20), and new cotter pin (19).

6.

Install ramp pump (16) and new gasket (18) in flange (11). Secure with four screws (17) and retaining ring (15).

7.

Install coupling (14) on secondary pump drive gear (13).

8.

Place new packing (12) on flange (11).

9.

Install ramp pump (16) shaft in coupling (14).

10. Install flange (11) on transfer gearcase. Secure with two screws (9) and new key washers (10). TIGHTEN SCREWS TO

144 -1 80

LB

-

IN

(1 6-20 N·M) TO R QUE. Use torque wrench.

0020 00-4