TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 172 of 785

TM 9-2350-261-34

REPLACE TRANSFER GEARCASE — Continued

0020 00

11. Secure lever (7) on actuator (8) with new spring pin (6).

NOTE

Carriers with a 200 amp generator have a different generator drive pulley than carriers with a

100 amp generator. Check that the new transfer gearcase has the proper generator drive

pulley for your carrier. If not, remove generator drive pulley assembly from unserviceable

transfer gearcase. Inspect drive assembly. If serviceable, install drive assembly in new transfer

gearcase. If unserviceable, install new drive assembly in transfer gearcase. Install improper

or unserviceable drive assembly in unserviceable transfer gearcase. See TM 9-2520-238-34

and TM 9-2520-238-34P.

12. Install fan drive pulley (4) on secondary intermediate gear (5). Secure with screw (1), washer (2), and key (3).

002000-5