TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 163 of 785

TM 9-2350-261-34

REMOVE/INSTALL TRANSFER GEARCASE — Continued

0019 00

INSTALLATION

1.

Apply a thin coat of antiseize compound to cleaned threads of 12 screws (1), (3), and (5) removed.

2.

Attach a lifting device of at least 200 lb (91 kg) capacity to transfer gearcase. Have helper assist.

3.

Align transfer gearcase with engine. Have helper assist.

4.

Install two screws (5) and washers (6).

5.

Install one long screw (3) and washer (4).

NOTE

If pump has been replaced, follow Steps 7 - 9.

7.

Install new packing (19) and elbow (11) in differential oil pump (18).

8.

Install nut (15) on elbow (14).

9.

Install new packing (17), retainer (16), and elbow (14) in differential oil pump (18).

10. Install new packing (13) and quick disconnect half (12) on elbow (14).

0019 00-6

6.

Secure transfer gearcase to engine with nine screws (1) and washers (2). TIGHTEN ALL 12 SCREWS TO 252-300

LB-IN (28-34 N·M) TOR QUE. U se torque wrench. LO O SEN AND RETIGHTEN TO 25 2-3 00

LB

-

IN

(28-34 N·M)

TORQUE. Use torque wrench.