TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 160 of 785

TM 9-2350-261-34

REMOVE/INSTALL TRANSFER GEARCASE — Continued

0019 00

7.

Remove cotter pin (7) and headed pin (8) that secure engine quick disconnect/connect handle (9) to disconnect arm

(10). Discard cotter pin.

8.

Remove headless pin (11) securing disconnect arm (10) to shaft (12) on transfer gearcase. Remove arm.

9.

Loosen locknut (1) on rod end (2).

10. Turn turnbuckle (3) to the left to loosen two generator drive belts (4).

NOTE

There can be different generator components on transfer gearcase. Refer to TM 9-2350-261-20

for 200 amp generator maintenance components.

11. Remove two generator drive belts (4) from generator pulley (5) and transfer gearcase pulley (6).

12. Remove nut (7), screw (8), and turnbuckle (3) from idler arm bracket (9).

001900-3