TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 158 of 785

TM 9-2350-261-34

REMOVE/INSTALL TRANSFER GEARCASE

0019 00

THIS WORK PACKAGE COVERS:

Removal (page 0019 00-1).

Installation (page 0019 00-6).

INITIAL SETUP:

Maintenance Level

Direct Support

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0104 00, Item 19)

Torque Wrench (WP 0104 00, Item 58)

Lifting Device 200 lb (91 kg) Capacity

Materials/Parts

Antiseize compound (WP 0105 00, Item 5)

Cotter pin

Key washer (5)

Packing (3)

Personnel Required

Track Vehicle Repairer 63H10

Helper (H)

References

See your -20

Equipment Condition

Power plant removed (see your -20)

Power plant blocked (WP 0015 00)

Transmission removed from transfer gearcase

(WP 0016 00)

REMOVAL

CAUTION

Cap or cover openings where fuel oil, coolant, or hydraulic lines or fittings have been removed.

NOTE

If you need to replace the engine, transmission, or transfer gearcase, drain the oil from each

BEFORE power plant is removed from carrier.

1.

Drain hydraulic system (see your -20).

2.

Remove screw (1), key washer (2), and clamp (3) that secure hydraulic hose (4) to transfer gearcase. Discard key washer.

001900-1