REPLACE TRANSFER GEARCASE — Continued
4.
Remove spring pin (6) and lever (7) from actuator (8). Discard spring pin.
5.
Remove two screws (9), key washers (10), flange (11), and packing (12) from secondary pump drive gear (13). Discard
key washers and packing.
6.
Remove coupling (14) and retaining ring (15) from ramp pump (16).
7.
Remove four screws (17), ramp pump (16), and gasket (18) from flange (11). Discard gasket.
8.
Remove cotter pin (19), nut (20), and washer (21) that secure differential oil pump (22) to secondary pump drive gear
(23). Discard cotter pin.
9.
Remove two screws (24) and key washers (25) that secure differential pump (22) and gasket (26) to transfer gearcase.
Discard gasket and key washers.
10. Remove differential oil pump (22), retaining ring (27), and key (28) from drive gear (23).
002000-3
0020 00
TM 9-2350-261-34