REPAIR/REPLACE ACCELERATOR STOP SUPPORT ASSEMBLY — Continued
FOLLOW-THROUGH STEPS
1.
Install upper and lower service brake pedals (see your -20).
2.
Install lower accelerator pedal (see your -20).
3.
Install upper accelerator pedal (see your -20).
4.
Install driver’s seat (see your -20).
5.
Connect battery ground strap (see your -20).
6.
Start engine (see your -10). Check that accelerator pedal works right.
7.
Raise and lock ramp (see your -10).
8.
Stop engine (see your -10).
END OF TASK
0052 00-4
0052 00
TM 9-2350-261-34