TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 369 of 785

TM 9-2350-261-34

REPAIR RAMP ACCESS DOOR — Continued

0053 00

2.

Remove two nuts (10), screws (9), and spacers (8) that secure ramp door (7) to four hinge parts (2) on ramp (3). Remove

door from ramp. Have helper assist.

NOTE

Shoulder bushings (1) and (5) provide clearance between spacer and upper ramp hinge part.

Replace bushings that do not provide 1/16 inch (2 mm) clearance.

3.

Remove two shoulder bushings (5) from two hinges (6) on ramp door (7).

4.

Remove two bushings (4) from two upper hinge parts (2) on ramp (3). Remove two shoulder bushings (1) from two

lower hinge parts (2).

INSTALLATION

NOTE

Shoulder bushings (1) and (5) provide clearance between spacer and upper ramp hinge part.

Replace bushings that do not provide 1/16 inch (2 mm) clearance.

1.

Install two shoulder bushings (1) in two lower hinge parts (2) on ramp (3).

2.

Install two bushings (4) in two upper hinge parts (2) on ramp (3).

3.

Install two shoulder bushings (5) in two hinges (6) on ramp door (7).

0053 00-2