TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 441 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M113A2, M901A1, AND

M1059 ONLY) — Continued

0059 00

31. Install coolant heater fuel pump (7) on bracket (8). Secure with two screws (9), four lockwashers (10), two washers

(11), and two nuts (12).

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

32. Apply a thin, even coat of primer and then sealing compound (WP 0105 00, Item 17) to cleaned external tapered pipe

threads of adapter (13) and elbow (14). Do not apply primer or sealing compound beyond small end of tapered threads.

33. Install adapter (13) on coolant heater fuel pump (7).

34. Install fuel hose (15) on adapter (13).

35. Install elbow (14) on coolant heater fuel pump (7).

36. Install fuel hose (16) on elbow (14).

0059 00-8