TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 439 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M113A2, M901A1, AND

M1059 ONLY) — Continued

0059 00

23. Remove two screws (15), two washers (16), plate (17), and gasket (18) from engine right side. Discard plate and gasket.

24. Install elbow (19) and drain cock (20) in mount (21).

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

25. Apply a thin coat of sealing compound (WP 0105 00, Item 18) to both sides of gasket (22) before assembly.

26. Install mount (21) and gasket (22) on engine right side opening. Secure with two screws (15) and washers (16).

27. Install hose (23) on elbow (19). Secure with clamp (24).

0059 00-6