TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 448 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M113A2, M901A1, AND

M1059 ONLY) — Continued

0059 00

69. Connect coolant pump hose (14) and engine hose (15) to heat exchanger (11). Hoses must go through grommets (13).

70. Pull two hoses (14) and (15) through two grommets (13) in personnel compartment until hoses reach battery box (7).

71. Install two insulation tubes (16) on two hoses (14) and (15) at rear of power plant compartment.

72. On M113A2 only, install two hoses (1) and (2) through four brackets (3) on right sponson.

0059 00-15