TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 457 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M113A2, M901A1, AND

M1059 ONLY) — Continued

0059 00

100. Remove two screws (4) and control panel (5) from control box case (6).

101. Remove and discard two screws, nuts, and washers supplied with control box case (6).

102. Install control box case (6) on hull bracket (7). Secure with two screws (8).

103. Install control panel (5) to control box case (6). Secure with two screws (4).

104. Connect circuit 400A lead (9) to control box lead (10).

105. Connect control box connector (11) of wiring harness (12) to control box receptacle (13).

106. Connect main wiring harness 402A lead (14) to coolant heater wiring harness lead (15). Secure wiring harness (12) to

front main wiring harness (16) with eight straps (17).

0059 00-24