TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 464 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M577A2 AND M1068 ONLY) — Continued

0060 00

4.

Apply a thin, even coat of primer and then sealing compound (WP 0105 00, Item 17) to cleaned external tapered pipe

threads of bushing (1), shutoff cock (2), elbow (3), and elbow (4). Do not apply primer or sealing compound beyond

small end of threads.

5.

Install bushing (1), shutoff cock (2), and elbow (3) in coolant pump (5).

6.

Install two mounting saddles (6) on mounting bracket (2). Secure with four screws (3), washers (4), and nuts (5).

7.

Install two clamps (1) on two mounting saddles (6).

8.

Install coolant heater (7) on two mounting saddles (6). Secure with two clamps (1).

006000-3