TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 453 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M113A2, M901A1, AND

M1059 ONLY) — Continued

0059 00

85. Remove plug (1) from oil cooler elbow (2). Discard plug.

86. Clean external pipe threads of elbow (3) and adapter (4) with solvent, cleaning compound.

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

87. Apply a thin, even coat of primer and then sealing compound (WP 0105 00, Item 17) to cleaned external pipe threads of

elbow (3) and adapter (4). Do not apply primer or sealingcompoundbeyondsmallendofthreads

.

88. Install elbow (3) in elbow (2).

89. Install adapter (4) in elbow (3).

90. Install insulation tube (5) on hose (6) and secure with tape.

91. Install hose (6) on adapter (4). Secure with clamp(7)

.

0059 00-20