TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 435 of 785

TM 9-2350-261-34

INSTALL ENGINE COOLANT HEATER KIT (M113A2, M901A1, AND

M1059 ONLY) — Continued

0059 00

1.

Install mounting bracket (1) on right front sponson. Secure with four screws (2), washers (3), and lockwashers (4).

2.

Install coolant pump (5) and ground lead (6) for wiring harness (7) on mounting bracket (1). Secure with clamp (8),

two screws (9), three washers (10), one lockwasher (11), and two nuts (12).

3.

Install two mounting saddles (6) on mounting bracket (2). Secure with four screws (3), washers (4), and nuts (5).

4.

Install two clamps (1) on two mounting saddles (6).

5.

Install coolant heater (7) on two mounting saddles (6). Secure with two clamps (1).

0059 00-2