TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34

  TM-9-2350-261-34 - Page 427 of 785

TM 9-2350-261-34
INSTALL ELECTRONIC EQUIPMENT HEATER KIT (M577A2 ONLY) — Continued
0058 00
66. Apply a light coat of silicone compound to mating surfaces of rear main wiring harness circuit 402A lead (1).
67. Place circuit 402A lead (1) on rear main wiring harness clamps (2).
68. Install circuit 402A lead (1) along rear main wiring harness (3) up to forward hull grommet. Secure with nine cradles
(4) and cradle clips (5).
69. Install six clamps (2) on circuit 402A lead (1). Secure clamps to power plant compartment bulkhead weldnuts (6)
with six screws (7).
70. Connect capacitor (8) lead (11) to circuit 402A lead (1).
0058 00-16


Back to Top