TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 426 of 785

TM 9-2350-261-34

INSTALL ELECTRONIC EQUIPMENT HEATER KIT (M577A2 ONLY) — Continued

0058 00

59. Remove two screws (3). Remove panel (4) from heater control box case (5).

60. Remove and discard two nuts furnished with control box case (5). Retain two lockwashers (6) and screws (7).

61. Place control box case (5) on bracket (8). Secure with retained screws (7), retained washers (6), and new nuts (9).

62. Place panel (4) in case (5). Secure with two screws (3).

63. Connect wiring harness (10) to connector on control box panel (4).

64. Install shell (11) and washer (12) on pin contact of heater control box lead (13).

65. Connect circuit 400A lead (14) to control box lead (13).

0058 00-15