TM 9-2350-261-34
INSTALL ELECTRONIC EQUIPMENT HEATER KIT (M577A2 ONLY) — Continued
0058 00
81. Connect circuit 402A leads (20) and (21).
FOLLOW-THROUGH STEPS
1.
Connect battery ground negative lead (see your -20).
2.
Open heater fuel shutoff valve (see your -10).
3.
Start heater. Check that it is properly installed. Turn heater to OFF (see your -10).
4.
Install floor plates (see your -20).
5.
Raise and lock ramp (see your -10).
6.
Stop engine (see your -10).
END OF TASK
0058 00-19/20 blank