TM 9-2350-261-34
REPAIR POWER CONTROL ENCLOSURE, LEFT PANEL (M1068 ONLY) — Continued
0084 00
11. Install eight circuit leads (3) on terminals of relay socket (4) and secure with six screws (1) and lockwashers (2).
12. Plug relay socket (1) in relay XK2 (2).
1 3.
In stall relay bail (3) over r elay X K 2 (2 ) and relay soc ket ( 1) on left panel ( 4) and secure with two screws (5), n
e
locknuts (6), and four washers (7).
14.
Install new
tie
straps (8) on wires as required.
15. Close/install faceplate (9) on enclosure (10) and secure with ten screws (11) and new lockwashers (12).
008400-7