TM-9-2350-273-BD
M48/M60 SERIES TANK, COMBAT FULL-TRACKED 105-MM GUN
TECHNICAL MANUAL; OPERATORS, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; BATTLEFIELD DAMAGE ASSESSMENT AND REPAIR
TM-9-2350-273-BD - Page 89 of 288
TM 9-2350-273-BD
ELECTRICAL SYSTEM
SECTION IV.
6-10. TURRET, NO HYDRAULIC POWER
General Information:
Turret Power
The turret hydraulic power is needed to operate the turret. The manual back-up system
can be used without the main hydraulic power being functional but the operation would
be seriously degraded. The stabilization system will be inoperative. This procedure will
give a method to power up the hydraulic system.
Limitations
None
Personnel/Time Required
2 soldiers
1 to 2 hours
Materials/Tools
Multimeter
Tape
Soldering iron
Assessment Steps:
1. Turn MASTER power switch ON.
2. Check that ELEV/TRAV power indicator light lights.
a. If yes, go to step 13.
b. If no, go to step 3.
3. Turn MASTER power switch OFF.
6-8
Back to Top
