TM-9-2350-277-10
CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; OPERATOR’S MANUAL
TM-9-2350-277-10 - Page 701 of 889
TM 9-2350-277-10
BREAK/JOIN T130 TRACK — Continued
0092 00
7.
Mark nut so unit maintenance can torque it.
8.
Remove two track fixtures. Use adjustable wrench.
9.
Adjust track tension (WP 0091 00).
10. Stow crowbar and track fixtures on rear top deck. Stow hammer and industrial goggles in tool bag.
11. Unblock carrier tracks (WP 0042 00).
12. Fill out DA Form 2404 to notify unit maintenance to torque marked track pin nut.
END OF TASK
0092 00-8
Change 4
6.
Install a nut on the other end of the track pin. Tighten both nuts until two or three threads show between the nuts and the
ends of the pin or about 1/8 of an inch. Use 1/2 inch drive socket handle and 11/16 inch socket.
Back to Top
