TM-9-2350-277-20-1

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 6

TM-9-2350-277-20-1 - Page 612 of 855

TM 9-2350-277-20-1

DRIVER’S VISION ENHANCER (DVE) DISPLAY DOES NOT WORK

0116 01

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0926 00, Item 65)

Multimeter (WP 0926 00, Item 30)

Personnel Required

Mechanic

References

TM 9-2350-277-10

Equipment Condition

Engine stopped (TM 9-2350-277-10)

DVE power switch off (TM 9-2350-277-10)

NOTE

These procedures cover the DVE with a commander’s DVE installed. Cable 12461152 includes

power and video cable to commander’s display and power to the driver’s display through

cable 12460610. See TM 11-5855-311-12&P-1 (to be released at a later date) for the sensor set

assembly or display. If vehicle does not have commander’s DVE display installed, power cable

12460610 is plugged directly into DVE power switch.

If problems in operation are because of the sensor set assembly or driver’s/commander’s

display, see TM 11-5855-311-12&P-1 (to be released at a later date).

T

1.

Operate driver’s vision enhancer (DVE). See TM 9-2350-277-10.

2.

Does driver’s DVE display work?

TN

GO TO

AY

(PAGE 0116 01-3)

Y

1.

Is it an intermittent problem?

YN

1.

Beyond unit maintenance. Sensor set

assembly or display may be faulty.

See TM 11-5855-311-12&P-1 (to

be leased at a later date).

2.

Notify supervisor.

011601-1

Change 5