TM-9-2350-277-20-2

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6

TM-9-2350-277-20-2 - Page 102 of 783

TM 9-2350-277-20-2

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING

LUBRICATION INSTRUCTIONS — Continued

0155 00

ITEM

NO.

INTERVAL

MAN-

HOUR

ITEM TO BE

CHECKED OR

SERVICED

CREWMEMBER

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE

IF:

48

Semi-

Annual

Electrical

Connectors and

Leads

a.

Check electrical connectors for looseness or

broken contact. Replace broken connectors

(WP 0382 00).

b.

Check that electrical leads in power plant

compartment are not frayed, cut, or broken.

If leads are damaged, identify damaged

lead. Go to the Table of Contents for

electrical lead/harness connectors repairs

and locate the specific task to repair or

replace the damaged lead or wiring harness.

49

Semi-

Annual

0.5

Drive Shafts and

Universal Joints

NOTE

See Step 1g under General Maintenance

Instructions for proper use of torque

wrench adapter.

a.

Check for loose or missing screws and

lockwashers on universal joints. TIGHTEN

LOOSE SCREWS TO 86-92 LB-FT

(117-127 N•M) TORQUE. Use torque

wrench (WP 0926 00, Item 79) and adapter.

Any hardware

is loose,

broken, or

missing.

0155 00-82

Change 5