TM-9-2350-277-20-2

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6

TM-9-2350-277-20-2 - Page 248 of 783

TM 9-2350-277-20-2

REPLACE AIR CLEANER DOOR — Continued

0169 00

INSTALLATION

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

NOTE

Clean area on door before installing new gasket.

1.

Apply adhesive to new gasket (3).

2.

Install new gasket (3) on door (1).

3.

Install door (1) on air cleaner (2).

FOLLOW-THROUGH STEPS

1.

Close power plant access door. See TM 9-2350-277-10.

END OF TASK

0169 00-2

Change 5