TM-9-2350-277-20-3
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6
TM-9-2350-277-20-3 - Page 201 of 941
TM 9-2350-277-20-3
REPLACE HORN SWITCH (M58 ONLY) — Continued
0293 01
TRANSMISSION
VEHICLE
ENGINE
CLOGGED FILTER
LOW PRESS
HI TEMP
HEADLIGHTS
HORN
LOW COOLANT LEVEL
LOW OIL PRESS
HIGH BEAM
PARKING BRAKE
STEERING LOCKED
M58 ONLY
0293 01-2
2.
Remove nut (5) and HORN switch (2) from warning light panel (6).
3.
Remove lockwasher (4) and nut (3) from HORN switch (2).
FOLLOW-THROUGH STEPS
1.
Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00).
2.
Turn MASTER SWITCH to ON (see your -10).
3.
Press HORN switch to check for proper operation (see your -10).
4.
Turn MASTER SWITCH to OFF (see your -10).
END OF TASK
INSTALLATION
1.
Install nut (3) and lockwasher (4) on HORN switch (2).
2.
Install HORN switch (2) through rear of warning light panel (6). Secure with nut (5).
3.
Connect circuit 25/25A connector (1) to rear of HORN switch (2).
TRANSMISSION
VEHICLE
ENGINE
CLOGGED FILTER
LOW PRESS
HI TEMP
HEADLIGHTS
HORN
LOW COOLANT LEVEL
LOW OIL PRESS
HIGH BEAM
PARKING BRAKE
STEERING LOCKED
M58 ONLY
Change 1
Back to Top
